Selecciona una dirección de envío
Principales Características
Especificación
Features:
\xe2\x80\xa2 Material: ABS Plastic
\xe2\x80\xa2 Light Color: Blue / Yellow
\xe2\x80\xa2 Size: As shown in picture
\xe2\x80\xa2 Connection: Red-Positive, Black-Ground
\xe2\x80\xa2 Voltage: DC 12V
\xe2\x80\xa2 Universal for most motorcycles with 10 mm screw holes
\xe2\x80\xa2 No ERMASPEED LOGO
Packaging:
4pcs x Motorcycle Turn Signal Lights
Connection:
Red-Positive, Black-Negative. Please choose a resistor to light them with added safety.
Tip:
\xe2\x80\xa2 Soft rubber and ABS plastic junction, please don't fold strongly
\xe2\x80\xa2 After receiving the goods, don't rush to install it, first use a 12V DC fully charged BATTERY to test it directly, which can save you a lot of trouble and worries.
(DON'T USE VOLTAGE TEST OVER 12V!!! It is easy to damage.)
Note:
\xe2\x80\xa2 If some of the LED lights are off or the turn signal is not working properly. Please check that your wiring is correct.
(If the original Motorcycle RELAY does not support the LED, the RELAY needs to be replaced)
\xe2\x80\xa2 Slight overflow of glue is a normal phenomenon and does not affect the function of the product. Perfectionists buy carefully!
Universal for motorcycle with 10mm thread screws hole.
Use 12 LED bulbs formed around, led with high brightness.
High quality aluminum, anti- rust
Obtener Puntos GB! ¡Sé el primero en escribir un comentario!
Ver recomendaciones personalizadas
¿Nuevo cliente? Empieza aqui