Focalprice Modelo de Motor Térmico
Compartir a:

Focalprice Modelo de Motor Térmico

- PLATA Y DORADO 197169803

con Alta Velocidad de Rotación Dos Cilindros Base de Acero Inoxidable para Niños
Por favor refiérase a la descripción en inglés.
56.99
  • ENVÍO GRATIS Tiempo estimado de envío: días hábiles El tiempo de procesamiento del pedido puede requerir algunos días. Una vez enviado desde el almacén, el tiempo de envío (o entrega) depende del método de envío.
  • +
  • sin intereses "Puedes disfrutar un máximo de "Puedes disfrutar un máximo de 0 sin intereses plazos, y puede que no disfrute esta oferta hacer pedidos con otros productos "
;   
Información de impuestos Protección de precios Exención de responsabilidad de Precio Garantía de Reparación Informe del proyecto
Liquidación

Recomendaciones destacadas

Los clientes que compraron este artículo también compraron

Descripción: 
Motor de Stirling es un motor de combustión externa que tiene un gran potencial para convertir la nueva energía en electricidad. 
La temperatura de un vaso de agua caliente es suficiente para hacer que el motor funcione rápidamente y la coordinación de las diferentes partes se puede observar de cerca. Su excelente mano de obra también hace que el modelo de un buen regalo de cumpleaños para los niños pequeños.  

Características Principales: 
Desarrollado por Agua Caliente 
Un vaso de agua, que temperatura es de 30 grados más alta que la temperatura del aire, puede proporcionar un perfecto de suministro de energía para el motor. Todo el dispositivo comienza a trabajar después de presionar el volante hacia la derecha / hacia la izquierda. 
Buena Herramienta para Aprender de Física 
El modelo puede despertar el interés de los niños en la conversión de diferentes tipos de energía. También puede saber más acerca de la aplicación de nuevas fuentes de energía.

-Fácil Montaje
No se requiere ninguna herramienta adicional. Sólo tiene que pulsar los pequeños ganchos en el eje, y poner el eje entre las dos puntales.
-Mano de Obra Brillante
El pequeño cilindro compuesto por pistón de vidrio y un marco de acrílico, por lo tanto, la resistencia entre ellos es muy baja pero la estanqueidad del aire es impresionante. Además, La base lisa del acero inoxidable es poco probable ser oxidado.

Especificación

Información General

Materials : Metal
Tema: Fantasy and Sci-fi
Tipo: Unisexo
Lo completo: Producto semi terminado
provenir de: Otros

Dimensiones y peso

Peso de Producto: 0.236 kg
Peso de Paquete: 0.415 kg
Tamaño de producto: 10.30 x 10.30 x 13.00 cm / 4.06 x 4.06 x 5.12 pulgadas
Tamaño de Paquete: 21.50 x 11.00 x 14.50 cm / 8.46 x 4.33 x 5.71 pulgadas

Contenido de Paquete

Contenido del Paquete: 1 x Volante (con Eje), 1 x Base

Focalprice Modelo de Motor Térmico- Plata y Dorado

Supongo que le gusta

Opiniones de los usuarios

4.88 de 5
  • 14
  • 2
  • 0
  • 0
  • 0
Ver todo 16 comentario Haz reviews
  • Reagan
    Great little Stirling engine. Ran off the heat of my hand vs. air conditioned air.
    This engine came in two parts, the wheel and all the rest of it. It arrived and I had driven to the post office. I stopped in the parking lot and put it together. This is a matter of hooking two connecting rods over the offset crank. You have to look at the wheel. One side is closer to the wheel than the other and of you look, you will see that one lines up with the displacer and the other lines up with the power piston (the power piston is the small one).

    They kind of snap on. No tools are needed.

    Once I had the connecting rod snapped on, I put the engine in my hand, and I put it in front of a vent so that the AC blew on the top and my hand was underneath, there might have been a 20F difference in temperature. After a minute, I gave it a spin and it started. It ran slowly, about 60 RPM. But it ran. On the difference in temperature between my hand and the output from an AC vent.

    I took it home, it ran most of the way. I have a sous vide that maintains 160F and has a plastic top to slow evaporation. I put it on top of the heated container. and after a short time, I spun the engine and it started. I decided I wanted more speed, so I put a zip lock bag of crushed ice, sealed, on top. The speed probably hit 300 RPM.

    The engine has been running for more than an hour. It runs about 70 RPM (just a guess, slightly faster than I would count seconds).

    The engine is useless other than as a physics demonstration. I have wanted one of these for some time, but I never wanted to spend way more money than this costs for something that is just a toy..but this is much cheaper. It works. It is shiny.

    May 22,2018

  • Joey
    happy to spot this low cost Stirling Engine
    I'm a big fan of functional models, so I was happy to spot this low cost Stirling Engine on GearBest. I've seen similar models for more than three times the price, but I thought I would take a chance on this one. I'm glad I did. This model has great build quality and it runs flawlessly as expected.

    I've tested it with under both hot and cold conditions and it runs beautifully both ways.

    First, I simply put it on top of a cup of hot water. The base is pretty wide, so it's got great surface area, and it fits nicely on top of most coffee mugs.

    Next, I just put it in my hand, with a couple of small ice cubes on top. The difference between the heat of my hand and the ice cubes was all it took to keep the engine running a long time.

    I didn't check to see how long it would run on the cup of hot water... but I stopped it after about 20 minutes and it was still going strong.

    Apr 10,2018

  • Daniel Susi
    This is Cool!
    Comes partially disassembled, but very easy to put together. Mesmerizing! Heated a coffee mug of water in the microwave, put the engine over the cup and gave the fly-wheel a turn. The engine started up and over a few seconds increased its speed to maximum. It kept the grandkids (and grownups in the room) watching and periodically peeking in to see when it would stop. 35 minutes later it was still going, albeit much slower. With some extra instrumentation that the user would need to obtain and configure to measure the volume and temperature of the water, the temperature of the plates, and the mass and speed of rotation of the fly-wheel, the device could be used for some high-school level physics experiments. I have not done this, but seeing the engine work as well as it does, it would appear to be the next step beyond simply watching the device.

    Jul 02,2018

  • William R.
    A lot of fun and does not require batteries!
    This little toy is CRAZY FUN! I'm an old guy and once I got it running I felt like a little kid at Christmas. It ran over 25 minutes before I took it off the hot water mug. It had slowed down quite a bit but even kept running for awhile just sitting on the table.
    Intend to put it on top of ice cubes and see how that works (per instruction sheet in box). I have always been fascinated with anything steam powered over a hundred years ago - trains, tractors, sawmills. It is mesmerizing to watch the mechanical parts moving in unison to produce a usable power force to benefit mankind. This "toy" is a great educational aid and I can not wait to show what is does to my grandsons (ages 3 and 7).
    Thanks for making such a high-quality product at an affordable price. This experience has wetted my appetite to look at more"scientific toys".

    Jun 14,2018

  • Thomas
    Works just as I expected - delighted with my purchase!
    Extremely satisfied with my purchase. This is a well-made item and works just as I expected. Minor assembly required, and that's due to the design. I bought this to serve as an attention getter for a set of poster presentations at a technology company. It was very effective. Its low speed and graceful lines were instant attention getters.

    The little engine is well made, and worked right out of the box. I have used both hot water from the tap, and ice-water mix to run it. As expected, a cold source makes it run in the opposite direction than a hot source.

    Jun 27,2018

  • andioan
    Nice present
    Excellent choice for present
    good modeling of a Stirling engine
    Very good quality of its structure
    nice object for desk decoration and for anyone involved in engineering

    Sep 20,2018

  • Haley
    Mini size with magic energy
    Maybe you would be surprise when you hold it in your hand, what a exquisite small object it is!

    Jun 09,2018

  • gxrhstos
    Focalprice Handheld Stirling Engine
    Great quality
    Great packaging
    User Manual in English
    It works
    Sugerencia
    Expensive

    Aug 27,2017

  • Balek
    Cool
    - cheapest on the market .
    - works great .
    - simple and robust .
    - looks nice .
    - runs as advertised .
    Sugerencia
    Pretty loud when working

    Jun 04,2018

  • Madison
    Fun to play with it
    At first I got the model, I had no idea how to use it. After I read the description and instructions carefully, I realized that a glass of unsealed boiling water was necessary. Not bad!

    May 30,2018

Preguntas y respuestas del cliente

  • Todo
  • Información del Producto
  • Estado del stock
  • Pago
  • Sobre Envío
  • Otros

Sea el primero en hacer una pregunta. ¿Quieres Puntos GB? Sólo tiene que escribir un comentario!

Sea el primero en hacer una pregunta. ¿Quieres Puntos GB? Sólo tiene que escribir un comentario!

Sea el primero en hacer una pregunta. ¿Quieres Puntos GB? Sólo tiene que escribir un comentario!

Sea el primero en hacer una pregunta. ¿Quieres Puntos GB? Sólo tiene que escribir un comentario!

Sea el primero en hacer una pregunta. ¿Quieres Puntos GB? Sólo tiene que escribir un comentario!

Sea el primero en hacer una pregunta. ¿Quieres Puntos GB? Sólo tiene que escribir un comentario!

0 Preguntas y respuestas Ver todos>

Productos patrocinados relacionados con este artículo

Visto recientemente

Ver recomendaciones personalizadas

¿Nuevo cliente? Empieza aqui