Anycubic I3 MEGA Impresora 3D FDM con Marco de Metal Completo

- BLANCO Y NEGRO ENCHUFE US 212977903

€315.27
  • ENVÍO GRATIS Fecha de despacho: Nov 15 - Nov 16, Tiempo estimado de envío: días hábiles El tiempo de procesamiento del pedido puede requerir algunos días. Una vez enviado desde el almacén, el tiempo de envío (o entrega) depende del método de envío.
  • +
  • sin intereses "Puedes disfrutar un máximo de "Puedes disfrutar un máximo de 0 sin intereses plazos, y puede que no disfrute esta oferta hacer pedidos con otros productos "
;   
Información de impuestos Protección de precios Exención de responsabilidad de Precio
Liquidación

LUSJi

4.7/5.0
  • 5 estrella 75%
  • 4 estrella 21%
  • 3 estrella 3%
  • 2 estrella 0%
  • 1 estrella 1%

Recomendaciones destacadas

Los clientes que compraron este artículo también compraron

Renuncia:

● Lea atentamente y siga el manual del usuario antes de ensamblar u operar la impresora 3D.

● La modificación y personalización de la impresora 3D están estrictamente prohibidas. No asumiremos ninguna responsabilidad por ningún problema resultante de las modificaciones.

● Utilice siempre el voltaje de AC correcto para su región.

● No coloque la impresora 3D cerca de materiales inflamables / combustibles ni de fuentes de calor.

● Use la impresora 3D solo en áreas bien ventiladas. Mantenga una distancia segura de la impresora.


Anycubic I3 MEGA Impresora 3D


Principales Características:

● Adopta cualquier plataforma cúbica de ultrabase, eliminando los objetos impresos más fácilmente que otras impresoras 3D

● Montaje extremadamente simple, un rendimiento más estable

● No hay necesidad de firmware y depuración, imprime fácilmente después de ensamblado

● Todo el marco de metal para la rigidez y extender la vida útil

● Doble impulso en el eje Z, más potente

● Instalación de motor de tornillo de una pieza más conveniente, excelencia en el motor de tornillo trapezoidal paralelo, el error es menor, mayor precisión, instalación más conveniente

● Chip de controlador de motor paso a paso de precisión de 1.8 grados tiene independiente, se negó a perder paso

● Interruptor de alimentación de una pieza, prototipo de firmware de fuente abierta, fusible incorporado para escolta de seguridad

● Más 1 kg de materiales de PLA / ABS / HIPS / madera que el negro

● Diseño independiente de la placa base, totalmente compatible con la placa de fisión RAMPS, la instalación es más conveniente, un rendimiento más estable

Especificación

General

Marca: Anycubic
Tipo: DIY
Modelo: I3 MEGA
Área de grabado: 210 x 210 x 205 mm
cantidad de boquilla: Soltero
Diámetro de Boquilla: 0.4mm
temperatura de la boquilla: Temperatura Ambiente a 260 Grados
espesor de la capa: 0.05-0.3mm
Impresión en línea tarjeta de memoria: tarjeta SD
pantalla LCD: Sí
velocidad de impresión: 20 - 100mm/s
temperatura de la plataforma: temperatura ambiente hasta 100 grados
Material de apoyo: ABS,HIPS,PLA,Madera
Diámetro de Material: 1.75mm
Formato de archivo: AMF,DAE,G-código,OBJ,STL
precisión de posicionamiento XY-eje: 0.01mm
Voltaje: 110V / 220V
Alojar software de ordenador: Cura
Peso del producto: embalaje (no ensamblado)

Dimensiones y peso

Peso de Producto: 14,5000 kg
Peso de Paquete: 14,6000 kg
Tamaño de producto: 41,00 x 40,50 x 45,30 cm / 16,14 x 15,94 x 17,83 pulgadas
Tamaño de Paquete: 56,00 x 52,00 x 27,00 cm / 22,05 x 20,47 x 10,63 pulgadas

Contenido del Embalaje

Contenido del embalaje: 1 x Anycubic I3 Mega Impresora 3D, 1 x Lector de Tarjetas SD, 1 x Soporte de Carrete, 8 x Tornillo M5, 1 x Serie de Herramientas, 1 x Raspador, 1 x Alicates, 1 x Serie de Respaldo de Extremo Caliente, 1 x Guante, 1 x Pinzas, 1 x Tarjeta SD de 8G, 1 x 1 kg Filamento, 1 x Cable USB, 1 x Cable de Alimentación

Anycubic I3 MEGA Impresora 3D FDM con Marco de Metal Completo- White and Black US Plug

Anycubic I3 MEGA Impresora 3D FDM con Marco de Metal Completo- White and Black US Plug

Anycubic I3 MEGA Impresora 3D FDM con Marco de Metal Completo- White and Black US Plug

Anycubic I3 MEGA Impresora 3D FDM con Marco de Metal Completo- White and Black US Plug

Anycubic I3 MEGA Impresora 3D FDM con Marco de Metal Completo- White and Black US Plug


Supongo que le gusta

Preguntas y respuestas del cliente

  • Todo
  • Información del Producto
  • Estado del stock
  • Pago
  • Sobre Envío
  • Otros

0 Preguntas y respuestas Ver todos>

Productos patrocinados relacionados con este artículo

Opiniones de los usuarios

4.67 de 5
  • 61
  • 20
  • 2
  • 0
  • 1
  • Dirk
    great printer "out of the box"
    Color:White and Black Size:EU Plug
    Absolute fantastic 3D printer, 8 screws, 3 connectors, 4 screws for bed leveling and you are done. Very easy to build up. 1st printer that is almost printable out of the box. the 1st print was the pair of oils that are on the SD card. Perfect print.
    I build up 3 different china 3D printer before, all had bin kits and I needed 5 to 6 hours to build up and a lot of tweaking and add ones to print.
    the Anycubic i3 Mega is a perfect fast stetting up printer that owns the "print out of the box" status.
    In the package is a lot of useful tools , like screwdrivers etc, a 2nd complete spare Hotend, a spare switch with mounting option for the endstops. You also find 1 kg of PLA in the box. My 1st personal print with 8,5 h over night was also absolute great.
    I would say price fits for the good quality you get.
    Perfect printer for people that starts with the 3D printing hobby and do not like to learn the hard way how to build a 3D Printer. Also great printer for everybody how wants to print out of the box.
    Next Tests will be, ABS, Wood and flex filament, but maybe the flex could be a bit difficult, because its not a direct extruder (the extruder is mounted on the frame and not above the hotend).
    Sugerencia
    I haven`t found anything negative so far. May the y-axis the the hotbed drives on 2 linear rods, thats great, but in the left side is 1 linear ball-bearing and on the right side are 2, why not 2 on both sides?

    Sep 05,2017

    ¿Fue útil este comentario para usted?

  • Roberto
    It could have been better
    Color:White and Black Size:EU Plug
    nothing to say about shipping and packaging (gearbest ok +++++), but the problem was in the printer, arrived with wiring not well connected and more serious with the nozzle with the decentralized hole, thank goodness that there was a hot end of replacement from where I then took the nozzle, 10 days later I left the power supply, I managed to restart it by changing the fan but after a few days it stopped altogether.
    I wrote to Anycubic that has a nice support group, and within 15 days a nice new power supply came from China.
    despite the initial problems are 3 months that I print without problems, the quality is excellent, I knew it was a very good printer, but I was surprised by the details of incredible details (we are talking about a € 300 printer), you have no problems adhesion because the ultrabase plate is excellent
    would I recommend it? of course.
    Sugerencia
    nothing to say about shipping and packaging (gearbest ok +++++), but the problem was in the printer, arrived with wiring not well connected and more serious with the nozzle with the decentralized hole, thank goodness that there was a hot end of replacement from where I then took the nozzle, 10 days later I left the power supply, I managed to restart it by changing the fan but after a few days it stopped altogether.
    I wrote to Anycubic that has a nice support group, and within 15 days a nice new power supply came from China.
    despite the initial problems are 3 months that I print without problems, the quality is excellent, I knew it was a very good printer, but I was surprised by the details of incredible details (we are talking about a € 300 printer), you have no problems adhesion because the ultrabase plate is excellent
    would I recommend it? of course.

    Jun 12,2018

    ¿Fue útil este comentario para usted?

  • DH
    Awesome!
    Color:White and Black Size:EU Plug
    It took 15 mins to assemble, level and have my first print underway. The components are also very good quality and the overall assembly is very neat, the thing is built like a tank so is incredibly sturdy. No failed prints so far and they've all come out looking great. The version shipped to me was the ultrabase version (composite heat bed) so did not come with bed leveling sensor nor the bed leveling features in the software. However, manual leveling was very straightforward and i've only had to do this once so far. Bed adhesion is amazing! i've not had to use any glue sticks etc so worth the trade in bed level sensor in my opnion. Its also by far the quietest printer i've ever owned! the printer also comes with filament sensor, a spare hot end, metal spatula, tools and 1 Kg roll of filament.
    Sugerencia
    Ermmm... its heavy, better have a strong desk to put it on!

    Aug 21,2017

    ¿Fue útil este comentario para usted?

  • Toremmont
    Imprimante 3d
    Color:White and Black Size:EU Plug
    C'est ma première expérience chez Gearbest et ma première imprimantre 3D. La reception a été rapide et sans problème, le produit trés bien emballé.
    Le montage rapide et sans difficulté, en moins d'une heure je lançais ma première impression (fichier fournit dans la carte mémoire).
    La prise en main a donc été très rapide,.
    La carcasse de l'imprimamnte est entièrement en acier, les guides et vis de guidages semblent de bonnes factures. des pièces de rechanges et les outils nécessaires sont compris dans le poackage, ainsi qu'une bobine de 1kg de PLA.
    Je n'ai pas encore utilisé l'imprimante en connexion USB (pas indispensable) et ne peut donc pas me prononcer sur ce sujet. Je n'ai pas non plus essayé les fonction de reprises après coupure.
    Trés satisfait de mon achat et des premières expériences d'impression.

    Sep 18,2018

    ¿Fue útil este comentario para usted?

  • stefan
    easy start, high quality outcome
    Color:White and Black Size:EU Plug
    * Easy to assemble and operate (with some technical background, of cause)
    * Very solid construction causes good quality prints.
    * Started the first print 60 minutes after my doorbell rang, well I prepared myself by some videos on the internet
    * The manual is in English. There are lots of pictures. It is very helpful and explains everything
    * Everything needed (really everything, including tools) is included in the delivered box (which has a size, and a weight!)
    * Never had a single broken print with the included black PLA filament. All printing parameters are written in the manual.
    * Less than 10 percent broken prints with Verbatim ABS, probably due to temperature variations in my room (sunshine).
    Sugerencia
    * Bed levelling is tricky, but not to complicated
    * Looks like the bed is not completely flat, this does no harm in my case.
    * The filament spool holder looks good but has a rather thin axis with no bearings. It works, but there are millions of constructions for spool holders on the internet.

    Apr 30,2018

    ¿Fue útil este comentario para usted?

  • HDS1
    Vraiment Génial. Je recommande
    Color:White and Black Size:US Plug
    Vraiment Génial je recommande.

    Packaging vraiment soigné avec tous les outils nécessaires et une bobine PLA noir.
    La structure de l\'imprimante est vraiment rigide ce qui permet à la fois d\'éviter des vibrations ou de petits déréglages.
    Le nivellement du plateau est vraiment simple et précis! (contrairement à l\'Anet A8).
    Très bonne qualité d\'impression dès la première impression.
    Possibilité de changer les températures et vitesses d\'impression au cours de l\'impression très pratique!
    Bref pour une utilisation régulière ou de longue impressions je recommande vivement!
    Sugerencia
    Livraison un peu lente (commandée le 24Dec reçu le 10Janvier) mais prévue.

    L'adaptateur de la prise d'alimentation bouge beaucoup mais avec un coup de scotch fonctionne très bien.

    Jan 11,2018

    ¿Fue útil este comentario para usted?

  • OldCodger
    Amazing little machine. (International version.)
    Color:White and Black Size:EU Plug
    After six months of ownership, I can honestly say that this incredible little thing works better, quicker, and more intelligently than my daughter's Neato machine which was over twice the price. It was also nearly £100 cheaper than a Dyson vacuum that you have to push around yourself. What an outdated idea...

    I've just ordered a second one for my cleaning lady to take home. She deserves the rest. :o)

    Spare parts, including replacement motors, are available cheaply online.

    The latest firmware updates have brought the much requested "zoned cleaning" mode.

    It's my new best friend. ;o)
    Sugerencia
    I only wish I had found out about these things sooner.

    There are no cons, in my opinion. Buy one, be amazed.

    Jul 10,2018

    ¿Fue útil este comentario para usted?

  • Philip
    mr
    Color:White and Black Size:EU Plug
    -Excellent quality and sturdy metal frame.
    -Only have to screw 8 screws to setup printer, 99% pre assembled already for you.
    -User manual teaches you everything you need to know (even Cura settings etc)
    -Comes with 1kg filament (not like some other printers where you only get 3 or 5 meters)
    This is a excellent printer and probably one of the best bang for buck printers you can buy, this is my 3rd printer and i must say this is definitely one of my better ones so far! definitely recommend to others to buy
    Sugerencia
    none so far

    Sep 20,2017

    ¿Fue útil este comentario para usted?

  • William Wagner
    owner
    Color:White and Black Size:US Plug
    Great printer working good, although the nozzle was clogged up Gear Best sent a new nozzle. The printer was easy to set up just as advertised. simply level the bed and your go to go.
    Prints are great they come out really good. Shipping was a little slow but that is expected from China.
    I chose this printer because of the fast setup, build other printer took almost 2 days to get running. I have printed PLA ABS and PETG with no problem. The print bed it fantastic simply let the print cool and then pop off the print, no prying or hard to get off. Would buy again from Gear Best
    Sugerencia
    none

    Apr 16,2018

    ¿Fue útil este comentario para usted?

  • Seyfullah GOKOGLU
    Yeni başlayanlar için ideal bir yazıcı
    Color:White and Black Size:EU Plug
    - Hızlı ve kolay kurumu ile yeni başlayanlar için ideal bir yazıcıdır.
    - Baskı doğruluğu ve eksen kalibrasyonları çok iyi. Kurulumdan sonra hızlı ve doğru bir şekilde baskı alınabiliyor.
    - Metal şasesi ile dayanıklılık artırılmış.
    - Taşıma sırasında kalibrasyon kolay kolay bozulmuyor.
    - PowerLoss özelliği sayesinde elektrikler kesilse bile baskıya kaldığı yerden devam edebiliyor.
    - Filament sensörü sayesinde filament bittiğinde baskı bekliyor ve filamenti değiştirip baskıya devam edebiliyorsunuz.
    - Dokunmatik LCD ekran kullanım kolaylığı sağlıyor.
    - Paketleme oldukça iyi yapılmış.
    Sugerencia
    - Isıtıcı tabla ABS baskısı için yeterince ısınmıyor. Tabla sıcaklığı 96 derecenin üzerine çıkmıyor.
    - Otomatik bed seviye fonksiyonu da olsa çok daha güzel olurdu. Yazıcının bir önceki modeli bu açıdan daha iyiydi.

    Jul 04,2018

    ¿Fue útil este comentario para usted?

Visto recientemente

Ver recomendaciones personalizadas

¿Nuevo cliente? Empieza aqui