Todo
palabras claves del producto
Por favor, introduzca la cuenta de correo electrónico
Creality 3D CR - 10 Impresora 3D
Compartir a:

Creality 3D CR - 10 Impresora 3D

- Azul Enchufe EU
212296802

Máquina de Escritorio de DYI
4.74 339 Opiniones de los usuarios | Refiérase a descripción en inglés.
503
  • ENVÍO GRATIS
    COD Este producto admite COD en la entrega. Sugerencias: No realice pedidos con productos que no sean contra reembolso, de lo contrario no podrá elegir el método de pago contra reembolso.
    Tiempo estimado de envío: días hábiles El tiempo de procesamiento del pedido puede requerir algunos días. Una vez enviado desde el almacén, el tiempo de envío (o entrega) depende del método de envío.
  • +
  • sin intereses "Puedes disfrutar un máximo de "Puedes disfrutar un máximo de 0 sin intereses plazos, y puede que no disfrute esta oferta hacer pedidos con otros productos "
;   
Información de impuestos Protección de precios Exención de responsabilidad de Precio Garantía de Reparación Informe del proyecto

Recomendaciones destacadas

Los clientes que compraron este artículo también compraron

Renuncia:

● Lea y siga cuidadosamente el manual del usuario antes de ensamblar u operar la impresora 3D.

● La modificación y personalización de la impresora 3D están estrictamente prohibidas. No nos hacemos responsables de los problemas que resulten de las modificaciones.

● Utilice siempre el voltaje de CA correcto para su región.

● No coloque la impresora 3D cerca de materiales inflamables / combustibles ni de fuentes de calor.

● Utilice la impresora 3D solo en áreas bien ventiladas. Mantenga una distancia segura de la impresora.



CR - 10 Pantalla 3D de gran tamaño para impresora de escritorio DIY, con función de impresión fuera de línea de la tarjeta SD


Descripción:

La impresora de escritorio 3D CR - 10 es una impresora 3D con el marco de aluminio especial importado. Cuenta con un gran volumen de construcción de 300 x 300 x 400 mm, diámetro estándar de la boquilla de 0,4 mm (se puede reemplazar a 0,3 / 0,2 mm). Para mantener la sensación de estar en el garaje y los amuletos hechos a mano, la impresora de escritorio 3D CR - 10 también es un kit de creación usted mismo, que le brinda una experiencia de aprendizaje paso a paso inolvidable para la impresora 3D.


Principales Características:

● Con pantalla LCD y teclado para un uso sin conexión fácil

● Admite la impresión fuera de línea de la tarjeta SD, también puede imprimir directamente con un adaptador USB

● Volumen de construcción de 300 x 300 x 400 mm, justo para ti

● Soporta múltiples filamentos de impresión 3D: ABS / PLA / TPU y así sucesivamente

● Una estructura más simplificada significa un montaje rápido y un ajuste fácil, lo que le ahorra tiempo y energía

● Estabilidad y confiabilidad mejoradas: la placa de aluminio asegura una impresión más estable

● El montaje es sencillo y adecuado para clientes de bricolaje.

● Es un kit de bricolaje sin ensamblar, que le brinda una experiencia de aprendizaje paso a paso inolvidable para la impresora 3D desde cero. Mientras tenga una pasión por la creatividad, no puede permitirse perder este producto.

● Temperatura de la boquilla: por debajo de 250 ° C en un estado normal, máx. 270 Deg.C

● Con las funciones de detección de filamento de ruptura y continuar la impresión cuando se restaura el estado de apagado (solo para la versión actualizada)

● Nota: puedes hacer clicaquí para elegir otro color.


Descarga del controlador: haga clic aquí


Especificación

General

Marca: Creality
Modelo: CR - 10
Tipo: Hagalo usted mismo
Diámetro de Boquilla: 0.4mm
Impresión en línea tarjeta de memoria: tarjeta SD
Pantalla LCD: Sí
Velocidad de impresión: 150mm / s
Diámetro de Material: 1.75mm
Formato de archivo: G-código,JPG,OBJ,STL
Software de computadora anfitrión: Cura
Peso del producto: embalaje sin montar

Dimensiones y peso

Peso de Producto: 9,0000 kg
Peso de Paquete: 13,8000 kg
Tamaño del producto(largo×ancho×alto): 65,00 x 54,00 x 29,00 cm / 25,59 x 21,26 x 11,42 pulgadas
Tamaño de paquete: 66,00 x 55,00 x 30,00 cm / 25,98 x 21,65 x 11,81 pulgadas

Contenidos del paquete

Contenido del embalaje: 1 x CR - 10 Kit de Impresora de Escritorio 3D de DIY
Creality 3D CR - 10 Impresora 3D- Azul Enchufe EUCreality 3D CR - 10 Impresora 3D- Azul Enchufe EUCreality 3D CR - 10 Impresora 3D- Azul Enchufe EUCreality 3D CR - 10 Impresora 3D- Azul Enchufe EUCreality 3D CR - 10 Impresora 3D- Azul Enchufe EUCreality 3D CR - 10 Impresora 3D- Azul Enchufe EUCreality 3D CR - 10 Impresora 3D- Azul Enchufe EU

Supongo que le gusta

Opiniones de los usuarios

4.74 de 5
  • 269
  • 62
  • 2
  • 1
  • 5
Ver todo 339 comentario Haz reviews
  • Chris Durkin
    cdurkinz
    -Very good quality prints
    -Prints in most filaments
    -Everything is very high quality, heavy, metal, very skookam.
    -Chooches like the best of them!
    -Super quick and easy to assemble.
    -Some extra parts even
    -I've only just started but this seems to be one of the easier printers to upgrade quite a bit
    -Included micro-SD card has a couple prints on it already that are nice mods for the CR-10. Such as a couple strain reliefs and a guide, etc.

    Some incorrect things that GearBest answered when people have asked in the questions section, that I would like to clear up, I just hope those same people see this review.

    -It DOES come with a glass bed top ontop of the aluminum heated bed base.
    -It DOES come with a little PLA filament. It's not a ton but it's quite a bit to get you started, I've printed 4 or 5 things so far and I haven't even put a dent in it.
    -I believe the extruder in this is an MK8

    Finally on to shipping. I'm somewhat happy to say that this is the fastest I've ever received something from China. Usually things take 2-3 weeks or more but this arrived in 10 days from China to Central US (Northern IL). The one weird thing and I'm guessing something went wrong was that when I ordered it I chose expedited shipping, and DHL EXT. It was NOT clear what DHL EXT is or what half of the shipping options mean, but I can say that my package started in China using China Post and was delivered to my door using USPS, the entire time I had a USPS tracking number to track it.

    Now when I ordered and chose DHL EXT there was NO added shipping cost even though it said expedited, which I found interesting because I'm fairly certain expedited shipping from China would cost a few bucks. So I figure maybe this "DHL EXT" isn't for shipping to the US and so they just sent it through USPS. But I can't say for sure.
    Sugerencia
    -Not really a con but either it is tested before they ship it or I got one that someone returned and they fixed it or something.
    -Sticker on fan peeling off
    -A coupler's set-screws on the Y-axis stepper motor weren't affixed correctly, easy fix though so again not really a con. Plus I've read that some people have has those couplers snap in shipping so I figured this may have been done on purpose.

    The issue I had was when I went to tighten the set-screws they went all the way through and fell into the middle of the coupler. No big deal I had to loosen all the set screws and move things around to get them out and realized I had to move the coupler up a little bit for it to connect the Y-axis threaded pole and the stepper motor. Just an FYI

    Oct 04,2017

  • Daniele
    Architetto
    La stampante CR-10 è una buona stampante che ha un ottimo rapporto prezzo-prestazione. E' facile da montare anche dai meno esperti; di fatto c'è da unire i due pezzi principali, stringere le viti e collegare i fili x, y, z nella giusta posizione e poi non resta che partire per la prima stampa di prova. Come “tradizione” NON STAMPATE il file g-code del Gatto... è corrotto e dopo due ore di stampa va fuori centro ed è tutto da buttare! Scaricate da internet uno dei tanti files di prova e provate con quelli; a me ha funzionato molto bene il Robot di Ultimaker.
    Per stampare in PLA non è necessario scaldare il piatto, occorre solo il nastro per dare aderenza. Occorre fare una buona calibrazione, che con un piatto di così grandi dimensioni non è semplicissima anche se, una volta fatta, viene mantenuta a lungo.
    Il problema maggiore nella calibrazione del piatto è che se vanno bene gli angoli al centro la testina di stampa o è troppo vicina e raschia la superficie o è troppo lontana e il layer non aderisce bene... Ciò è probabilmente dovuto al fatto che il piano in vetro non è perfettamente piano ma tende ad alzarsi o abbassarsi al centro. Consiglio quindi, dato che le stampe non saranno sempre alla massima dimensione, di calibrare il piatto sulla parte centrale più utilizzata per stampe con la base fino a 18x18 cm, ed utilizzare tutti i 40 cm di altezza.

    Consiglio questa stampante, soprattutto se è la vostra prima stampante 3D dove poter sperimentare ed imparare i trucchi per una buona stampa.
    Sugerencia
    E' poco curata la documentazione fornita. La scheda fornita dovrebbe avere un maggior numero di files STL di esempio ed alcuni GCODE perfetti con le indicazioni dei parametri di slicing in modo da fare subito delle prove e verifiche. Sarebbe necessario anche avere da subito CURA nella versione più aggiornata, senza dover andare a scaricarla da internet.

    Dec 05,2017

  • Fredrik Stahre
    Software Engineer
    The printer works well and gives good prints. I'm new to 3D printing so I can't really compare to anything else except youtube clips from other printers. One thing I have notices is that the cat print (even though it didn't print the head) included gets printed in super awesome quality and prints I've gotten of Thingiverse and sliced with Cura does not reach that quality, I guess it has to do with settings in Cura and maybe the details of the 3D files. The quality is very nice anyway though, so no real complaint, just an observation. It takes some skills to do the right settings when slicing.

    My machine was not actually working ok when I first started it up. The temperature measurements were resetting randomly and resulted in Low Temp errors. I found that the problem is because the cable that goes to the to the nozzle, fans etc is glitchy, when I move the cable it looses connection. I've temporarily solved it by disassembling the connector on to the main unit and bent the cables a bit but it's not a long term solution. I will ask GearBest if the can send a new cable.

    Overall, for the price, this printer is very good so far and it was easy to assemble. If it hadn't been for that glitch in the cable it would have been super easy. Still, not recommended if you are looking for a Plug and Play experience, you need to watch some you tube vids, read some instructions and be ready to experiment a bit before you get nice prints.
    Sugerencia
    Bed levelling is a bit fiddly and I think it doesn't get exactly levelled. Mine is level in the corners but it's sagging down 0.1-0.2mm in the middle. I've solved it by levelling without tape in the corners and then printing on one layer of tape to get the middle part up 0.1 mm. I'm not sure how this will work for really big prints that goes all the way out to the edges though, the nozzle might come to close to the glass. I've yet to try any of the more advanced solutions with wedges under the bed. For now it works just fine with a layer of tape.

    Could use some more instructions on how to get started with setup and printing. How to get prints to stick to the bed and so on.

    Aug 04,2017

  • T (engineering student)
    Just received 9/15/18
    Took about about 10 days to get from China to Northern California. Got the printer set-up and printing in about an hour. The settings on the cat file that comes on the SD aren't great, had to lower nozzle temp to 192 and raise bed temp to 60. Still working on first complete print (PSU box legs) and notice a lot of stringing, which is likely due to settings (retraction probably).

    Okay, quality control issues.1. Y-axis belt tensioner bracket was bent causing belt to ride on one side of the pulleys and twist. 2. Bracket holding y-axis stepper motor is bent and causing same issue as the other end. These are very simple things to fix, which will happen after the current print is done. 3. They did not debur and clean up the metal from the holes being drilled in the frame. Easy thing to clean up, but it probably shouldn't be there. 4. Glass bed is warped. Everyone already knows about this, and I'm sure they are aware. Hope they fix this sooner than later. 5. Hot end heat sink not screwed in on one side and is sitting cockeyed. Noticed it during current print, I think all it needs to be tightened down. I hope they didn't mess something up and then leave it like that. I'll update later.

    Packaging was A+ great. Box was not beat up in shipping. Instruction manual is good enough.

    For the price (compared to amazon/others) it seems like this is a great deal.

    Sep 16,2018

  • Creality CR-10S Unboxing and Setup
    Creality CR-10S Unboxing and Setup
    The Creality3D CR - 10S 3D Desktop DIY Printer was a very simple and easy to build 3D printer that has very good print results.
    Highly recommend if you are in the market for a 3D printer that is low budget with good quality print output.
    Building the printer was very easy from start to finish. Very little skill was needed as a lot of the build was already done.
    Unbelievable 3D printer. Well worth the money
    Very good quality prints
    Prints in most filaments
    Everything is very high quality
    Super quick and easy to assemble.
    Some extra parts even
    I've only just started but this seems to be one of the easier printers to upgrade quite a bit
    Included micro-SD card has a couple prints on it already that are nice mods for the CR-10. Such as a couple strain reliefs and a guide, etc.
    Check out my unboxing and build video
    https://www.youtube.com/watch?v=jDU3mpXYGyc&t=33s
    Sugerencia
    A few loose bolts found on the assembled parts so check when you are building yours. These may have been left loose for transport.
    At this time there are no real cons as every thing was easily assembled and worked perfect from the start

    Jun 25,2018

Preguntas y respuestas del cliente

  • Todo(1)
  • Información del Producto
  • Estado del stock(1)
  • Pago
  • Sobre Envío
  • Otros
Q

I'd like to buy the cr 10s and ask about fue shipping to Mexico and if there's one in stock. Thanks

By cesar cerin Jun-22/2018 03:39:04

UN

Hello Cesar,


This is a popular product, but we are happy to inform you that it is in stock and available to purchase today. 

Please feel free to order it.


You can see the shipping cost and delivery time during the checkout. 


Simply add the items you wish to purchase to your cart and select your delivery country. The available shipping methods and cost will then be displayed.


The delivery cost depends on the shipping method chosen, along with other factors such as weight, shipping time and the destination country.  


Sea el primero en hacer una pregunta. ¿Quieres Puntos GB? Sólo tiene que escribir un comentario!

Q

I'd like to buy the cr 10s and ask about fue shipping to Mexico and if there's one in stock. Thanks

By cesar cerin Jun-22/2018 03:39:04

UN

Hello Cesar,


This is a popular product, but we are happy to inform you that it is in stock and available to purchase today. 

Please feel free to order it.


You can see the shipping cost and delivery time during the checkout. 


Simply add the items you wish to purchase to your cart and select your delivery country. The available shipping methods and cost will then be displayed.


The delivery cost depends on the shipping method chosen, along with other factors such as weight, shipping time and the destination country.  


Sea el primero en hacer una pregunta. ¿Quieres Puntos GB? Sólo tiene que escribir un comentario!

Sea el primero en hacer una pregunta. ¿Quieres Puntos GB? Sólo tiene que escribir un comentario!

Sea el primero en hacer una pregunta. ¿Quieres Puntos GB? Sólo tiene que escribir un comentario!

1 Preguntas y respuestas Ver todos>

Productos patrocinados relacionados con este artículo

Visto recientemente

Ver recomendaciones personalizadas

¿Nuevo cliente? Empieza aqui
Servicio de Preventa