Tronxy 255X255X260MM XY-2 Pro 24V Instalación Rápida 3D Pantalla Táctil a Todo Color 3,5 pulgadas

+Die Maschine liefert im allgemeinen gute Drucke.

++ Alles was ich gedruckt habe, kam mit einer hohel Qualität von der Maschine.

Doch es gab einige kleine Mängel.

-Eines der Laufräder an der X-Führung scheint ein angeschlagenes Kugellager zu haben.
Doch das scheint die Qualität der Drucke nicht zu beeinflussen.

--Ein etwas größerer Mangel ist, dass die Maschine in der Z-Achse ein Spiel von etwa 0,3 mm hat.
Das merke ich beim Z-Leveln. Wenn ich 0,1 mm schritte nach unten fahre, bis das Papier klemmt, dann muss ich mindestens 0,3 mm wieder nach oben fahren, biss es wieder leichter verschiebbar ist.

--Die Kabel und Filamentzuführung von Extruder zum Hotend ist nicht richtig durchdacht.
Die Maschine hat einen Arbeitsraum in der Z-Achse von 260 mm. Heute habe ich etwas Gedruckt, das 220 mm hoch war und die Kabel und Filamentzuführung schien schon zwischen der oberen verstrebung und Schlitten gefährlich gebogen zu werden.

-Das einfädeln des Filaments durch den Sensor und dann in den Extruder, kann teilweise schwierig sein, wenn man das Filament nicht zuvor sehr gerade biegt.

---Der größte Mangel den ich festgestellt habe, ist die ungünstige Positionierung des unteren Kühlventilators, der die Elektronik kühlt. So dicht über der Tischplatte wirkt das wie ein Staubsauger und saugt den kleinsten Schmutz sofrt auf.

Trotz all dieser Mängel, ist die Qualität der Maschine so hoch, dass es mir 4 Sterne wert ist.
Beseitigt noch die kleinen Designfehler, die das Arbeiten mit der Maschine erschweren und die Lebensdauer mancher TTeile mindern und ihr werdet ein top Produkt haben.

Aug 07,2020

Ok so let’s start out with saying this is not my first 3d printer that being said it was the easiest to put together. From the time I opened the box to the start of the first print was one hour and 20 mins. Part of that was unboxing and making sure I had everything. It took about 20-30 min to put it together. Then leveling the bed wow this has to the easiest bed I have ever leveled. Then I started the first print. Of course I pick one off the micro-SD card provided with the printer and it was a 10hr print. In this print I used the power-loss and resume feature it worked great. I also used the filament out feature and it worked great. I use the filament out feature a couple of times to change colors on the print was so easy to do. I did have a problem I had to contact tech support on and they got back to me in a couple of hours, on my other printers it would have been days or weeks so this is great.
Pros.
Prints up to 100mm/s
Touch screen32bit control board with resume on powerloss
Filament out detection
Heated bed
All metal build
Easy to get parts for if you want to modEasy to assemble

Jun 06,2019

My first printer was a Delta and gosh was it a pain to assemble than get it to work. However the Tronxy is remarkably easy to assemble. There are many YouTube videos available online for people who are total newbies. For me due to my schedule it took a couple of days to get it up and running but for a beginner it should take no more than 3-6 hours.

After the first print of traffic cone that got messed up due to some reason I started using tape on the build plate and that has worked out much better for me.

Pros.
Plenty of videos online for newbies.
Few steps of assembly
Touch screen - very easy and quick functioning
Support email is responsive.
Spare screws given.

Cons.
Instructions on the sheet aren't greatest for someone who's vanilla to 3D printing.

I would certainly recommend this printer. Great for the price

Jun 20,2019

When I first ordered this 3d printer there was a mix up at the distribution center, I didnt recieve it in the mail.

After contacting tronxy they swiftly assisted me and got another one sent out. They also included some extra filament for my troubles.

I had a few issues with cooling the controller and when I brought this concern to their staff they sent me a small fan that cools it down.

This printed has its little quirks but if you're willing to tinker around with it, it's a great 3d printer for the money!

If you ever have any troubles with it shoot their team an email, I would always get a response back in about 10 minutes!
One person found this helpful

Jun 20,2019

What an incredible value, this is my third 3d printer, the assembly was incredibly easy, the material quality is great with a solid aluminum chassis for great rigidity that holds level and true, the auto leveling and filament detection system, the removable flexible build plate.
I can honestly say IMPRESSED, and an incredible value.
Thanks guys this changes my whole 3d printer outlook for entry level printers that provide so much value at an affordable price. Also shipping and customer service was excellent.
Couldn't be happier.

Sep 01,2020